watermasterclass - laprentissdemond.com

What Is the total cost for both the prefilter and the Water Ionizer?

While the total cost depends on your location and the taxes for where you live...I have seen the combined total be as high as $6300.

Do I need the prefilter? Can I just purchase the Ionizer?

While it is not mandatory to have the prefilter, I strongly recommend it simply because the Ionizer has a filter that is only certified to remove chlorine, lead and sediment from the water. Unfortunately in America we have way more health harming chemicals in our water. You can visit https://www.ewg.org/tapwater/ to see what's in your water.

However, if you are not concerned about those other contaminates, then feel free to simply purchase the ionizer. I am only sharing to provide you the best possible water for your health.

Do I have to buy everything right now?

You don't have to buy everything right now. If you just want healthier water than bottled water, getting just the prefilter is a good start. It saves you money and helps your health and the environment. Later on, when you are ready you can invest in an ionizer. The rebate option is negotiable, and we can discuss that via email or through a call.

What is the oxidation-reduction potential (ORP)?

The oxidation reduction potential¹ is the electrical potential needed to reduce or slow down oxidation such as rusting. Kangen Water® must have a negative ORP in order to be considered good, especially for drinking.

ORP is the strength to bond with active oxygen² reducing power, and can be measured through electronic designs in the hardware. Although a negative value is desirable for deoxidization power, the actual value varies from region to region. For example, in Osaka city, tap water records an ORP of +580-600mV, but after using LeveLuk, the ORP becomes pH9.5 and records the ideal from -150mV to -400mV. When the original water supply's ORP increases, the ORP of Kangen Water® moves in direct proportion. On the Japanese archipelago, LeveLuk is capable of producing water with negative levels of ORP at pH9.5 even where original water supply marks the highest positive levels of ORP.

¹Oxidation-reduction potential (ORP) - Electrical potential needed to reduce or slow down rusting and decay (oxidization). This process is also known as deoxidization. ODR is measures in terms of negative mVs. The ideal ODR level for the human body is said to be between -150mV and -400mV.

¹Active oxygen - Also known as free radicals. Medically it is known to enter the body when one's daily rhythm of life or diet goes astray when under stress. It is the type of oxygen that causes illness and aging. Maintaining a daily rhythm will help keep this oxygen from entering your body!

What is the relationship between the oxidation-reduction potential (ORP) and pH?

The oxidization reduction potential is the electrical potential needed to reduce or slow down rusting and decay (oxidization.) The ORP¹ also represents the reduction capacity to attract active oxygen. The optimum levels for the human body is between -150– -400mV. The ORP is also closely related to pH levels. When the pH increases, the ORP also increases. It is also possible to increase ORP through electrolysis. The value depends greatly on the original water supply. An ideal ORP may not be achieved if the original water has a pH lower than 7.0. Please make sure to examine the properties of your original water, for failure to do so may lead to inexplicable errors.

¹ORP (Oxidation-Reduction Potential) - Electrical potential needed to reduce or slow down rusting and decay (oxidization). This process is also known as deoxidization. ODR is measures in terms of negative mVs. The ideal ODR level for the human body is said to be between -150mV and -400mV.

Will the state of the water change when heated or refrigerated?

The state of the water does change when the water is heated or chilled. When heated, the ORP and pH changes. When chilled, the ORP will change but the pH will remain the same for up to a week based on the quality of water.

Can this water be used to take medication?

No. Medication should be taken with 7.0 pH Clean Water.

What about differences in quality of raw water?

The type of original tap water used affects the quality of Kangen Water® and acidic water produced by electrolysis. Although water produced with municipal city water is not affected, the efficiency of electrolysis drops when well water is used since it tends to hold a lot of free carbon dioxide¹, as well as in cases where water comprising only a small amount of electrolytic minerals is used. Conversely, in cases where the water has excess minerals, the taste may be affected, or Kangen Water® produced may be too high in pH level. Since the water pressure of the faucet affects the production of water, it is important to confirm that genuine Kangen Water® is being produced by regularly checking that it is set at the correct pH level, and checking the bubbles. In order to take into account the differences in the quality of the original tap water, please run a check on a daily basis.

What about setting it up and cleaning?

Setting up is easy and I provide videos in the setup and order videos to get you started, The ionizers have a built in self clean feature and requires a monthly eclean. I provide detailed videos on how to perform this as well!

What about the filters? How often do they need to be replaced?

The filter is really easy to remove and replace. They last 1500 gallons and replacements are available between $110 to $130. While it depends on how much water you consume, they typically last 6 months.

What happens after I click the button?

Once you click the button a form opens up that enables you to connect with me for a quick call. During our call I answer any questions you may have and ensure we have a plan on how your device will be setup. Finally I walk you through purchasing and what to expect.

Enjoy the Water MasterClass Below!

Frequently Asked Questions